General HPLC Accessories
THERMO SCI 3P AIG PARTS & ACCESSORIES NANO VIPER FINGERTIGHT 75UM
NC1827074 NANO VIPER FINGERTIGHT 75UM
Waters Corp Waters Diamond Slurry, 1μm, 10mL
This diamond slurry is specifically formulated for polishing working electrodes.
- Material used to polish the working electrode.
- Particle size: 1μm.
- Volume: 10mL.
- Units per package: 1 pk.
Trajan Scientific EMITTER TAPERED TIP, COATED 360UM OD X 20UM ID X 50MM, 13 DEG, PK5
EMITTER TAPERED TIP, COATED 360UM OD X 20UM ID X 50MM, 13 DEG, PK5
Waters Corp Waters Check Valve Cartridge, Ceramic, 2/pk, for HPLC System
These replacement inlet check valve cartridges feature a ball and seat constructed from ceramic. Designed for HPLC systems, this optional check valve can help alleviate sticking issues and features a low internal volume.
- Replacement inlet check valve cartridges.
- Ball and seat constructed from ceramic.
- May help alleviate sticking issues sometimes occurring with other check valves.
- Low internal volume design.
- Supplied as 2 units per package.
- Designed for HPLC systems.
Waters Corp Waters Qualification Standards Test Kit, TQD/Q-Premier/XE/Q-Micro, 10 Component, Mass Spectrometry
The TQD/Q-Premier/XE/Q-Micro Qualification Standards Test Kit is part of the MS Triple Quadrupole Standards collection series. This kit is designed to enable scientists to assess the performance or calibrate the triple quadrupole detector. It facilitates mass scale calibration, resolution, and sensitivity testing across various ionization modes. Using this kit ensures optimal MS performance, providing confidence in assay results.
- Mass spectrometry standards kit for system assessment.
- 10 Component kit including various solutions and solids for specific tests.
- Separation mode: Reversed phase.
- Detection method: MS.
- Formulation: Liquid, solid.
- Storage condition: Room temperature.
- System type: MS.
- Application: System performance.
- Includes Certificate of Analysis and Solution Prep Document.
Waters Corp Waters Spacer, 50μm, Flow Cell Insert, HPLC
The 50μm Spacer is a flow cell insert gasket spacer that seals the flow cell and defines flow cell volume. This size is recommended for all standard applications.
- Seals the flow cell
- Defines flow cell volume
- Recommended for all standard applications
- Associated with HPLC systems
Waters Corp Waters Plunger Seal Insertion Tool
The Plunger Seal Insertion Tool is designed to facilitate the easy and precise insertion of new seals. This tool is used once the new seals have been lubricated with 100% alcohol, ensuring proper installation.
- Provides an easy way to insert new seals.
- Ensures precise insertion of new seals.
- Suitable for use after seals are lubricated with 100% alcohol.
Waters Corporation Tubing Assembly, Degasser Port B2 to SSV B, 1/16 in. OD, 0.040 in. ID
This product is a tubing assembly designed to connect the Degasser Port B2 to the Solvent Select Valve B. It is an essential component for maintaining the performance of various ACQUITY BSM systems.
- Connects Degasser Port B2 to Solvent Select Valve B.
- Features an outer diameter of 1/16 in.
- Features an inner diameter of 0.040 in.
- Compatible with ACQUITY I-Class BSM.
- Compatible with ACQUITY UPLC Binary Solvent Manager.
- Compatible with ACQUITY I-Class PLUS BSM.
- Compatible with ACQUITY H-Class PLUS Binary Solvent Manager.
Waters Corp Waters Flow Splitter, 0.5-2 mL/min, 15:1, 4 mm Column I.D.
The Flow Splitter is designed to control and accurately divide the flow for analytical systems. It supports a flow rate range of 0.5 to 2 mL/min with a 15:1 split ratio and is optimized for a 4 mm column I.D.
- Flow rate range: 0.5 to 2 mL/min
- Split ratio: 15:1
- Nominal flow rate: 1.25 mL/min
- Target column I.D.: 4 mm
- Maximum backpressure: 5171 kPa (52 bar, 750 psi) with water at 25°C
- Constructed with PEEKsil, capillary, and stainless-steel tubing
EATON CORP USB-A TO SER. DB9 RS232 ACABLE
USB-A to Serial DB9 RS232 Adapter Cable - 3 ft. Keyspan, High-Speed (M/M), TAA
Waters Corp Waters Backpressure Regulator, 250 psi, Mechanical, UPLC System
The Waters Backpressure Regulator is designed for precise pressure control in UPLC systems. It maintains a 250 psi backpressure and is typically placed after the detector when no Mass Spectrometer (MS) is present.
- Maintains 250 psi backpressure
- Mechanical type
- Compatible with UPLC systems
- Designed for placement after detector when no MS is used
ANALYTICAL SCIENTIFIC INSTRUMENTS US INC 25 UL ULTRA HPLC STATIC MIXER
25 µL Ultra HPLC Static Mixer inline house